AS/NZS 3112 澳规深度不接触规

澳规深度不接触规是根据标准AS/NZS 3112 图3.1设计制造而成的。

产品图片未包含Figure3.1 的(d)、(e)、(f)。

标准要求：

3.3.4 Depth of contact
3.3.4.1 Depth of contact for socket apertures for flat pins
For socket-outlets with apertures intended to accommodate plugs having flat pins, the following tests shall be performed.
When the test gauge of Figure 3.1(a) or Figure 3.1 (b), as appropriate, is inserted into the socket-outlet live contact apertures in any possible manner, without undue force, contact with live parts shall not be possible.
When the metal test gauge of Figure 3.1 (d) or Figure 3.1 (e), as appropriate, is inserted, perpendicular to the socket-outlet face, into each and every aperture for flat pins, contact shall be made before the gauge is fully inseted.

In addition, the three-pin test plug of Figure C1 of Appendix C or of Figure G1 of Appendix G, as appropriate, shall be capable of being fully inserted into a socket-outlet.

3.3.4.2 Depth of contact for socket apertures for round pins

For socket-outlets with apertures intended to accommodate plugs and having round pins conforming to the dimensional requirements of Figure 2.1, the following tests shall be performed.
When the test gauge of Figure 3.1(c) is inserted into the socket-outlet live contact apertures in any possible manner, without undue force, contact with live parts shall not be possible.

When the metal metal test gauge of Figure 3.2 (f) is inserted, perpendicular to the socket-outlet face, into each and every round contact aperture, contact shall be made before the gauge is fully inserted.

In addition, one of the three-pin test plugs shown in Figure G1 of Appendix G shall be capable of being fully inserted into a socket-outlet.

.